Category Archives: pegs

Flamenco on the Front Range

2019
AL#138 p.20               
Mark French                                                                                           

▪ Author Mark French is walking the lutherie path in the reverse direction of many makers. As a physics prof trained in the crazy magic of CNC and industrial robot processes, he had made a lot of guitars before he did much in the way of traditional low-tech hand-tool work. As part of an intensive effort to fill in those gaps, he attended an eight-day course at Robbie O’Brien’s shop in Colorado to make a flamenco guitar with Spanish luthier and licensed bloodless toreador Paco Chorobo. O’Brien went to Spain and visited Paco’s shop in 2015. Read all about it in AL124.

Peg Shapers That You Can Adjust

2008
AL#96 p.58               
David Golber                                                                                           

▪ The author got tired of hard-to-use commercial peg shapers, so he made a better one of his own. He describes it as a tool for actual human beings. With 6 photos and a drawing.

It Worked for Me: Hardanger Fiddle Pegs

2005
AL#83 p.61   BRB7 p.501            
David Golber                                                                                           

▪ Restoring old decorated Hardanger fiddle pegs. You need to preserve the old carved button, so this method involves grafting it to a new shaft.

Fitting Flamenco Pegs

2005
AL#82 p.44   BRB7 p.350            
Aaron Green                                                                                           

▪ As far as looks go, guitars with wooden tuning pegs are the cat’s patoot. Regarding long-term functioning, though… well, maybe you better read Green’s article. His method of installing hidden maple bushings in the headstock should put you way ahead of the game. With 21 photographs.

Violin Q & A: Raised Bridges/Fitting New Pegs/Loose Bass Bar/Fingerboard Tan Streaks/Russian String Setup

1997
AL#50 p.56   BRB5 p.458            
Michael Darnton                                                                                           

▪ This time the GAL’s fiddle guru talks about bridge shoes, fitting pegs, detecting a loose bass bar, streaky ebony, and “Russian” string setups.

Meet the Maker: Eric Meyer

1994
AL#39 p.18   BRB4 p.65            
Jonathon Peterson   Eric Myer                                                                                       

▪ Meyer’s current gig is the manufacture of violin fittings. He describes his peg making process in detail.

Practicum Sixteen: Fitting the Pegs

1993
AL#36 p.32   HLC p.210            
Robert Lundberg                                                                                           

▪ Lundberg explains how to fit the many pegs of graduating length and diameter. With 26 step-by-step photos and detailed captions. This series ran for 19 installments in American Lutherie and has been collected into our hardback book Historical Lute Construction.

Violin Q & A: Instrument Tone/Reaming For Pegs/Yellow Cold Glue/Stains

1993
AL#34 p.54   BRB3 p.446            read this article
Michael Darnton                                                                                           

▪ What adjustments change the tone of a violin? Should new pegs be reshaped or should the pegbox holes be opened to fit them? Which glue for a top center seam? Are stains really useless?

Violin Setups, Part One

1993
AL#35 p.6   BRB3 p.352            read this article
Michael Darnton                                                                                           

▪ To the uninitiated, violin setup seems to have way too many steps for the small number of moveable parts involved. Taken one step at a time, the mystery falls away. Darnton explains the tools and procedures he uses to get the most out of a violin. This segment includes fitting pegs, correcting problems with the nut, making a fingerboard, and fitting a soundpost. Part Two is printed in AL#37. With 30 photos.

This article has been nominated as one of the Guild’s best articles published before 2010.

Practicum Thirteen: Making the Pegs

1992
AL#31 p.50   HLC p.190            
Robert Lundberg                                                                                           

▪ Lundberg makes the pegs with a tiny machinist’s lathe. With 25 step-by-step photos and detailed captions. This series ran for 19 installments in American Lutherie and has been collected into our hardback book Historical Lute Construction.

Violin Q & A: Ebony For Pegs/Italian, German, French Building/Violin Societies/Oil Varnish

1992
AL#30 p.54   BRB3 p.446            read this article
Michael Darnton                                                                                           

▪ Darnton examines the use of various woods for tuning pegs, discusses the differences among Italian, German, French, and English methods of building fiddles, runs down a list of violin societies, and dismisses the use of supplier-prepared violin varnishes.

Practicum Twelve: Making the Pegbox

1992
AL#30 p.28   HLC p.178            
Robert Lundberg                                                                                           

▪ Making and veneering the tapered pegbox. With 50 step-by-step photos and detailed captions.photos. This series ran for 19 installments in American Lutherie and has been collected into our hardback book Historical Lute Construction.

Violin Q & A: Cooking Varnish/Fiddle Neck/Neck Finish Treatment/Peg Shaper

1990
AL#24 p.54   BRB2 p.486            
Michael Darnton                                                                                           

▪ Details include cooking varnish, finishing necks, causes of neck cracks, and adjusting a peg shaper to match your peg reamer.

Violin Q & A: Fingerboard Tearouts/Resharpen Peg Reamer/Tailpiece Saddle/Fingerboard Top/White Bridges

1990
AL#23 p.22   BRB2 p.486            
Michael Darnton                                                                                           

▪ Topics include sharpening a peg reamer, dealing with fingerboard tearout, tailpiece setup, pitching the neck, and staining the bridges.

The Erlangen Lectures Day Four: The Bridge, Neck, and Pegbox

1988
AL#15 p.6   HLC p.48            
Robert Lundberg                                                                                           

▪ This segment covers the bridge, neck, fingerboard, pegbox, and pegs of the lute. With photos and a number of drawings. This series is comprised of 19 installments.

Fiddle Facts

1986
AL#8 p.47   BRB1 p.296            read this article
Al Stancel                                                                                           

▪ Stancel offers an interesting potpourri of violin information concerning steel wool, bow bugs, tuning pegs, appraisers and the IRS, appraiser scams, and the dangers of steel strings to old fiddles.

Handmaking Zither Pins

1983
DS#246   BRB2 p.455            
Bruce Day                                                                                           

▪ Tuning pins on antique zithers are different and larger than modern steel pins. Fortunately they are not hard to make. Here’s how, including 2 drawings.

Fitting Lute Pegs

1981
DS#176   BRB2 p.260            
Lawrence-D. Brown                                                                                           

▪ Lute pegs are different than violin pegs and have their own requirements if they are to function properly. Brown gives a thorough explanation.